Water Resources and Industry (Dec 2018)

Development of iron oxide/activated carbon nanoparticle composite for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution

  • Monika Jain,
  • Mithilesh Yadav,
  • Tomas Kohout,
  • Manu Lahtinen,
  • Vinod Kumar Garg,
  • Mika Sillanpää

Journal volume & issue
Vol. 20
pp. 54 – 74

Abstract

Read online

Iron oxide (Fe3O4) and iron oxide/activated carbon (Fe3O4/AC) were fabricated by co-precipitation method for the removal of Cr(VI), Cu(II) and Cd(II) ions from aqueous solution in batch mode. These nanoparticles were characterized by BET, FTIR, XRD, SEM/TEM and VSM. The optimum conditions for the removal of ions were pH = 2 for Cr(VI) and 6 for Cu(II) and Cd(II), initial metal ion concentration = 50 mg L−1, nanoparticle dose = 50 mg/10 mL, temperature = 25 ± 1 °C, shaking speed = 180 rpm and contact time = 3 h. The equilibrium data of ions sorption were well described by Langmuir, Freundlich, Redlich-Peterson and Intraparticle Diffusion model. The R2 values obtained by Langmuir model were highest by Fe3O4/AC for Cr(VI) = 0.9994,Cu(II) = 0.9998 and Cd(II)= 0.9750. The temperature dependent study in the range of 288–328 K confirmed that the adsorption process was endothermic in nature. Desorption studies with 0.1 M HCl stated that these nanoparticles can be regenerated effectively and can be used after four adsorption-desorption cycles without any mass loss. Keywords: Activated carbon, pH, XRD, TEM, Iron oxide nanoparticles