eXPRESS Polymer Letters (Apr 2014)

Novel thermoplastic vulcanizates (TPVs) based on silicone rubber and polyamide exploring peroxide cross-linking

  • K. Naskar,
  • T. Chatterjee,
  • S. Wiessner,
  • G. Heinrich

DOI
https://doi.org/10.3144/expresspolymlett.2014.26
Journal volume & issue
Vol. 8, no. 4
pp. 220 – 231

Abstract

Read online

Novel thermoplastic vulcanizates (TPVs) based on silicone rubber (PDMS) and polyamide (PA12) have been prepared by dynamic vulcanization process. The effect of dynamic vulcanization and influence of various types of peroxides as cross-linking agents were studied in detail. All the TPVs were prepared at a ratio of 50/50 wt% of silicone rubber and polyamide. Three structurally different peroxides, namely dicumyl peroxide (DCP), 3,3,5,7,7-pentamethyl 1,2,4-trioxepane (PMTO) and cumyl hydroperoxide (CHP) were taken for investigation. Though DCP was the best option for curing the silicone rubber, at high temperature it suffers from scorch safety. An inhibitor 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO) was added with DCP to stabilize the radicals in order to increase the scorch time. Though CHP (hydroperoxide) had higher half life time than DCP at higher temperature, it has no significant effect on cross-linking of silicone rubber. PMTO showed prolonged scorch safety and better cross-linking efficiency rather than the other two. TPVs of DCP and PMTO were made up to 11 minutes of mixing. Increased values of tensile strength and elongation at break of PMTO cross-linked TPV indicate the superiority of PMTO. Scanning electron micrographs correlate with mechanical properties of the TPVs. High storage modulus (E') and lower loss tangent value of the PMTO cross-linked TPV indicate the higher degree of cross-linking which is also well supported by the overall cross-link density value. Thus PMTO was found to be the superior peroxide for cross-linking of silicone rubber at high temperature.

Keywords