Effect of Grain Size on the Properties of Aluminum Matrix Composites with Graphene

Abstract

The structure and mechanical properties of composites consisting of a metal matrix based on aluminum and its alloys of different compositions (AA-3003 and AA-5154) and graphene synthes sized in situ under a layer of molten salts were investigated depending on the chemical composition and grain size of the matrix. Aluminum matrix composites of three compositions were studied in as-cast coarse-grained, deformed fine-grained (grain size ε˙ from 1.8 − 4.7 × 103 to 1.6 − 2.4 × 105 s−1. It was found that grain refinement induced a sharp increase in the hardness of composites with various compositions (by a factor of 1.6–2.6). A correlation of the elastic-plastic properties of the aluminum matrix composites with the grain sizes and chemical compositions of the matrices was established. A transition from coarse-grained to sub microcrystalline structure was shown to improve the elastic-plastic properties on average by a factor of 1.5. It was proved that the reinforcing effect of graphene increased with the decreasing grain size of the matrix. Mechanisms of reinforcement of the aluminum matrix composites using graphene were proposed.

Keywords

• composite
• graphene
• structure
• dynamic properties
• transmission electron microscopy
• hardness