Journal of Structural and Construction Engineering (Jul 2020)
Optimal performance comparison of tall buildings with damped outrigger system by viscous and viscoelastic Kelvin-Voigt models under lateral vibration
Abstract
Using central core system with peripheral columns and outrigger and employing the energy dissipation devices, such as viscous damper, is one of the structure lateral displacement mitigation’s methods. The central core system with the damped outrigger under seismic loads can be assessed by transverse vibration of a cantilever beam subjected to a concentrated moment due to spring-damper system. In this paper, two models are proposed for damped outrigger. After obtaining differential equation of vibration of a beam interacted with damped outrigger modeled as viscous and viscoelastic, and eigen value analysis, characteristic equations are derived. Complex frequencies and mode shapes are obtained with respect to non-dimensional parameters such as damping ratio and outrigger location and results are presented as modal damping ratio surfaces versus damping ratio and outrigger location and so optimal of these parameters for each mode are attained. The optimal locations of outrigger at first mode are 0.47 and 0.5 of the building height for viscous and viscoelastic models, respectively. In second mode, this value is 0.8 for both models. Analyzing a finite element model of a 40-story building and comparing frequency responses of the optimal and non-optimized models and the undamped models including the traditional outrigger and traditional core system without outrigger, validity of the proposed method is verified. The maximum of roof displacement in viscous and viscoelastic models are respectively about 16.4 cm and 1.1 cm, while it exceeds than the criteria of 1/400 of building’s height in the undamped models. In spite of greater modal damping ratio of viscous model, performance of the viscoelastic model is better. This is an indication of unrealistic viscosity model.
Keywords