Study on the tribological characteristics of plant oil-based bio-lubricant with automotive liner-piston ring materials

Abstract

The development of bio-lubricant is an immerging area of research considering the rapid depletion of petroleum reserve and environmental concern. This study aims to develop non-edible jatropha oil-based bio-lubricant and investigate the tribological properties considering commonly used piston ring-cylinder liner materials of stainless steel and cast iron due to their interaction under lubricated conditions in an internal combustion engine. The bio-lubricant was prepared by blending different percentages of vegetable oil with commercial lubricants. The tribological test was carried out using a Reo-Bicerihigh-frequency reciprocating rig (HFRR) for the duration of 6 ​h under standard operating conditions. Different properties of bio-lubricants were measured before and after the HFRR test using various analytical instruments. The morphology of the worn material surfaces was examined via Hitachi S-4700 FE-SEM cold field emission high resolution scanning electron microscopy (SEM). The result showed that addition of vegetable oil lubricant up to 7.5% concentration can be compared with commercial lubricant in case of wear rate and coefficient of wear as weight loss reduced significantly. Minimum change in viscosity was observed at the addition of 7.5% bio-lubricant. Surface morphology analysis confirmed less damage of metal surface when tribological analysis were performed at mixed lubricated condition.

Keywords

• Bio-lubricant
• Tribology
• Vegetable oil
• Lubrication
• Wear and friction