Research on Laboratory Testing Method of Fatigue Performance of Semi-Rigid Base Considering Spatial Stress State

Abstract

In order to accurately assess the fatigue performance of semi-rigid base layers, this paper proposes a novel fatigue testing method for semi-rigid base layers that takes into account the spatial stress state. Based on this method, the fatigue performance of three types of reinforced semi-rigid base-layer materials (steel wire mesh, plastic geogrid, and fiberglass) was tested and compared with unreinforced materials. The fatigue strain evolution patterns of these materials were analyzed, and a fatigue strain characteristic value at the limit state was proposed as an evaluation index for the fatigue failure of base layer materials. The results showed that in terms of fatigue performance, plastic geogrid > steel wire mesh > fiberglass > unreinforced specimens. The development of tensile strain can be approximately classified into a three-stage growth pattern, consisting of “curve + straight line + curve”. For the unreinforced specimens, the three stages of bending strain accounted for 10%, 70%, and 20% of the total fatigue life, respectively. The fatigue failure stages of the three types of reinforced materials had similar proportional ranges, representing 5%, 75%, and 20% of the total fatigue life, respectively. The fatigue strain characteristic values for plastic geogrid, steel wire mesh, fiberglass, and unreinforced specimens were 371 με, 280 με, 280 με, and 195 με, respectively. In summary, the use of reinforced materials within semi-rigid base layers enhances their fatigue performance, providing new insights and methods for extending the service life of road surfaces and offering scientific guidance for the practical application of reinforced materials in semi-rigid base layer road surfaces’ fatigue performance.

Keywords

• base layer
• reinforcement materials
• MTS
• fatigue performance
• spatial stress state