Assessment of the Thermal Performance of Vertical Green Walls Using Overall Thermal Transfer Value Based BIM Simulation Method: Case Study of Residential Buildings in Sub-Tropics

Abstract

Construction of multifunctional building envelopes using vertical greenery walls (VGW) has emerged as a sustainable green technology to improving cooling efficiency. To attaining the desired level of building cooling performance, VGW and overall thermal transfer value (OTTV) of the walls are useful design factors. The study aims to revise the current VGW evaluation, considering the decreased heat flux due to thermal efficiency of wall construction based on OTTV values. To achieve this, OTTV based Building Information Modelling (BIM) simulation method was proposed using Autodesk-Revit and DesignBuilder simulation based on EnergyPlus. Six wall compositions with various OTTV values of south facade for residential buildings located in sub-tropical in cooling season, were evaluated. The findings demonstrate that in the presence of a green system, a good OTTV value of the exterior walls is required for optimal performance, to keep the space within set point of cooling for long time during the cooling season. The comparisons between the bare walls and the VGW have demonstrated a great variation due to the different OTTV reached up to 6.57% and 18.44% reduction in indoor air temperature. The best combination of VGW resulted a maximum of 1.2°C reduction in indoor air temperature, with number of hours (within 28°C or less) were higher by 2506h, representing 85.59% of the overall number of hours (2928h). Overall cooling energy saving is found as 103.3kwh, representing 13.63% of the total of energy saving, and decreased the heat gained by 38.82%, representing 61.51kwh reduction during cooling season compared to base wall.

Keywords

• overall thermal transfer value
• vertical greenery
• bim
• building energy simulations