A Quasi-Nondestructive Evaluation Method for Physical-Mechanical Properties of Fragile Archaeological Wood with TMA: A Case Study of an 800-Year-Old Shipwreck

Abstract

Archaeological wood is a kind of ‘new material’ that has deteriorated due to long-term degradation. The existing wood science theory and evaluation methods are not fully applicable to archaeological wood. Moreover, current physical-mechanical evaluation methods are inadequate for fragile archaeological wood due to their insufficient accuracy and the large sample amount required, causing difficulties in many necessary physical-mechanical repeatability tests. In light of these limitations, the representative samples on Nanhai No. 1, a merchant shipwreck in the Song Dynasty, were selected as the research objects in this paper. The shipwreck is a typical waterlogged wooden artifact. A quasi-nondestructive physical-mechanical evaluation technique for archaeological wood was developed with the thermomechanical analyzer (TMA). This study used TMA to evaluate the bending strength of representative waterlogged archaeological samples of Nanhai No. 1 shipwreck and sound wood with the same species. Besides, the thermal linear expansion coefficients in the ambient temperature range were obtained. The sizes of the samples used in the tests were only 2 mm × 8 mm × 0.3 mm and 1 cm × 1 cm × 1 cm, respectively. Bending strength results of archaeological wood by the TMA method conformed to the tendency that the bending strength decreases with the increase of decay degree. In addition, the longitudinal linear expansion coefficients of archaeological wood reached 80%–115% of those in the transverse grain direction, which were about 10 times higher than those of the sound wood. The linear expansion coefficients of archaeological wood in three directions were similar. Based on the results of Fourier transform infrared analysis (FT-IR), the significant differences in the physical-mechanical properties of the archaeological wood and the sound wood were induced to be mainly ascribed to the decomposition and the loss of hemicellulose in the archaeological wood. The cell wall substrate could not stabilize the cellulose skeleton, which led to the instability of the tracheid structure of the archaeological wood. This study provided a proven quasi-nondestructive method for the preservation state evaluation of waterlogged archaeological wood (WAW) from the Nanhai I shipwreck and other similar waterlogged wooden relics.

Keywords

• wooden artifacts
• thermomechanical analysis
• bending strength
• thermal expansion