Evaluation of the Potential of a Biocoagulant Produced from Prickly Pear Peel Waste Valorization for Wastewater Treatment

Abstract

This study evaluated the potential of a biocoagulant produced from prickly pear peel waste valorization and its use as a biocoagulant aid mixed with aluminum sulfate to remove turbidity in domestic wastewater. A central composite design (CCD) and a simplex lattice design (SLD) of two components (biocoagulant and aluminum sulfate) were developed to determine the optimal doses and pH of the biocoagulant and optimal mixing proportions. Both designs optimized the coagulation process from an analysis of variance to fit the experimental data to mathematical models and an optimization analysis to obtain the highest percentage of turbidity removal. The results showed that a water pH of 4 and a biocoagulant dose of 100 mg/L are optimal conditions for a turbidity removal of 76.1%. The potential decreases to 51.7% when the wastewater pH is maintained at 7.8 and a dose of 250 mg/L is used. This efficiency could be increased to 58.2% by using a mixture with optimal proportions of 30% biocoagulant and 70% aluminum sulfate. The experimental data were fitted to two quadratic models, estimating model prediction errors of 0.42% and 2.34%, respectively. Therefore, these results support the valorization of prickly pear peel waste to produce a biocoagulant, which could be used in acid and alkaline wastewater or as a biocoagulant aid mixed with aluminum sulfate.

Keywords

• biocoagulant
• experimental design
• optimization
• turbidity removal
• wastewater treatment