Advanced Prussian Blue Cathodes for Rechargeable Li-Ion Batteries

Abstract

Taking advantage of fact that the surface electrons of metallic nanoparticles (NPs) can be effectively released even at a low voltage bias, we demonstrate an improvement in the electrochemical performance of nanosized Prussian Blue (PB)-based secondary batteries through the incorporation of bare Ag or Ni NPs in the vicinity of the working PB NPs. It is found that the capacity for electrochemical energy storage of the 17 nm PB-based battery is significantly higher than the capacity of 10 nm PB-based, 35 nm PB-based or 46 nm PB-based batteries. There is a critical PB size for the highest electrochemical energy storage efficiency. The full specific capacity CF of the 17 nm PB-based battery stabilized to 62 mAh/g after 130 charge–discharge cycles at a working current of IW = 0.03 mA. The addition of 14 mass percent of Ag NPs in the vicinity of the PB NPs gave rise to a 32% increase in the stabilized CF. A 42% increase in the stabilized CF could be obtained with the addition of 14 mass percent of Ag NPs on the working electrode of the 35 nm PB-based battery. An enhancement in CF was also found for electrodes incorporating bare Ni NPs but the effect was smaller.

Keywords

• rechargeable battery
• Prussian blue
• cathode material
• metallic nanoparticle
• cyclability enhancement