Materials (Jun 2023)

Evaluation of Thermochemical Treatments for Rice Husk Ash Valorisation as a Source of Silica in Preparing Geopolymers

  • Noelia Bouzón,
  • Alba Font,
  • María Victoria Borrachero,
  • Lourdes Soriano,
  • José Monzó,
  • Mauro M. Tashima,
  • Jordi Payá

DOI
https://doi.org/10.3390/ma16134667
Journal volume & issue
Vol. 16, no. 13
p. 4667

Abstract

Read online

The use of geopolymers has revolutionized research in the field of construction. Although their carbon footprint is often lower than that of traditional mortars with Portland cement, activators such as sodium silicate have a high environmental impact in the manufacturing of materials. Employing alternative alkali sources to produce geopolymers is necessary to obtain materials with a lower carbon footprint. The present research explores the use of rice husk ash (RHA) as an alternative source of silica to produce alkaline activators by four methods: reflux; high pressure and temperature reaction; thermal bath at 65 °C; and shaking at room temperature. To evaluate the efficiency of these methods, two types of experiments were performed: (a) analysing silica dissolved by the filtering/gravimetric method; and (b) manufacturing mortars to compare the effectiveness of the treatment in mechanical strength terms. The percentages of dissolved silica measured by the gravimetric method gave silica dissolution values of 70–80%. The mortars with the best mechanical strength results were the mixtures prepared with the thermal bath treatment at 65 °C. Mortar cured for 1 day (at 65 °C), prepared with this activator, yielded 45 MPa versus the mortar with commercial reagents (40.1 MPa). It was generally concluded that utilising original or milled RHA in preparing activators has minimal influence on either the percentage of dissolved silica or the mechanical strength development of the mortars with this alternative activator.

Keywords