Hot deformation behavior and constitutive equation of TB8 titanium alloy with a lamellar structure of α phase

Abstract

The hot deformation behavior of TB8 titanium alloy with a lamellar α structure in the α+β dulex phase region was investigated. The results show that at the strain rate of 1 s-1, a continuous flow softening phenomenon is observed in the curve of the samples deformed at 650 ℃, while a discontinuous yield phenomenon is visual in the curve of the samples when the deformation temperature is higher than 650 ℃. The discontinuous yield phenomenon is gradually disappeared with increasing deformation temperature and strain rate. When the strain rate is 0.001 s-1 and the deformation temperature is 750 ℃ as well as 800 ℃, typical characteristics of dynamic recrystallization is presented in the curve of the samples. The relationship among peak stress σp temperature T and strain rate ε · and is characterized by Arrhenius-type constitutive equation. The equation between the material constants (α, Q, n and lnA) and strain is constructed. The effect of strain on the material constants (α, Q, n and lnA) of the Arrhenius-type constitutive equation is analyzed. The value of α is increased with true strain, while the values of Q, n and lnA are gradually decreased. The correlation coefficient (R2) and the AARE value between the experimental and the predicted stress are 0.945 and 9.08%, respectively. This indicates that the strain-compensates Arrhenius type constitutive equation can better predict the flow stress value under different deformation conditions for the TB8 titanium alloy with a lamellar α structure deformed in the α+β dulex phase region.

Keywords

• tb8 titanium alloy
• hot deformation
• flow behaviour
• constitutive equation