Journal of Engineering and Applied Science (May 2024)

Effect of material characteristics of lead rubber isolators on seismic performance of box girder bridge

  • Mirza Aamir Baig,
  • Imteyaz Ansari,
  • Nazrul Islam

DOI
https://doi.org/10.1186/s44147-024-00451-5
Journal volume & issue
Vol. 71, no. 1
pp. 1 – 19

Abstract

Read online

Abstract Near-field (NF) earthquakes have distinct ground motions, forward directivity pulses, and fling-step motions, causing structural responses to differ from far-field (FF) earthquakes. Seismic isolation is regarded as a developed and successful technology that may be applied to enhance a structure’s functionality and safeguard it against catastrophic earthquake effects. The variation in mechanical properties of seismic isolation also significantly influences bridge seismic response. The study investigates the influence of lead rubber (LRB) isolators and the characteristics of ground motions on seismically isolated bridges, aiming to determine optimal parameters for minimal earthquake response. Key parameters include ground motion characteristics, characteristic strength (Q), and isolator flexibility. The study modeled the force-deformation behavior of isolators using bilinear behavior, reflecting the Bouc-Wen hysteric model. CSI Bridge was used to model seismically isolated steel box girder bridges, with eight natural accelerograms assessing a 2% probability of exceedance in 50 years. The peak responses of pier displacement (MPD), isolator hysteric energy (HED), base shear, and deck acceleration are chosen as the response parameters for the comparison. To evaluate the response parameters, the earthquake data are scaled to the three studied peak ground acceleration (PGA) levels of design level (0.2 g), extreme level (0.4 g), and rare-extreme level (0.8 g). The findings offer insight on the relevance of isolator stiffness and its influences on the seismic performance of isolated bridges. The study identifies minimum values for pier displacement, hysteric energy, deck acceleration, and base shear at specific Q/weight sustained by isolator (W) and time period (T) values. Recommendations are made for the preliminary seismic isolation design of bridges with LRB isolators, highlighting the importance of PGV to PGA ratio in earthquake damage assessment.

Keywords