Shear Bond Performance of UHPC-to-NC Interfaces with Varying Sizes: Experimental and Numerical Evaluations

Abstract

This paper explores the effect of bonding size on the shear performance of ultra-high-performance concrete (UHPC) and normal concrete (NC). The study includes two sets of direct shear tests on a total of 16 Z-shaped UHPC-NC bonded specimens. The first set consists of eight direct shear tests on the chiseled UHPC-NC interface with an average roughness of 4 mm (referred to as series C), from the authors’ previous study. The second set involves eight direct shear tests on the chiseled UHPC-NC interface with additional short shear steel rebars (referred to as series CS) that possess identical roughness to the first set of tests. The study discusses the failure modes, shear stress–slip behavior, and strain histories of the UHPC-NC interfaces with varying bonding sizes and shear mechanisms. A finite element model incorporating the cohesive zone model for the UHPC-NC interface was developed to gain insights into the shear bond evolutions. Our experimental results show that the two sets of direct shear specimens exhibit similar size effects in the shear stiffness, bonding strength, and interfacial slippage of the UHPC-NC interface. The use of shear steel rebars mitigated the impact of interfacial size on the bond shear behavior, thereby enhancing shear stiffness and reducing susceptibility to brittle damage. Numerical simulations indicate that the shear stress inhomogeneity coefficients for the CS specimens with bonding heights of 100 mm, 200 mm, 330 mm, and 440 mm were 1.2%, 1.8%, 11.9%, and 17.4%, respectively. The findings of this study provide valuable insights for optimizing UHPC applications in the repair and strengthening of concrete structures.

Keywords

• UHPC-NC interface
• size effect
• shear strength
• direct shear test
• cohesive simulation