Tikrit Journal of Engineering Sciences (Dec 2020)
Simulation And Analysis of An Intelligent Power System Stabilizer Using Fuzzy Logic
Abstract
The basic aim of the power system stabilizer is to damp the fluctuations that occur on the rotating axis of the synchronous generator that result from noise or disturbance on the power system. This is achieved by producing an appropriate damping torque for these fluctuations across the excitation circuit of the generator and for a wide range of operation conditions. The study describes the types of power system stabilizers and giving an mathematical model of the power system that consists of a synchronous machine connected to the infinite bus though transmission lines. This has been achieved by simulating the electric and mechanical equations of power systems and proposing a methodological approach to design a Fuzzy Logic Power System Stabilize (FPSS) relaying in the design on the (Matlab/Fuzzy logic toolbox).Speed deviation (Δω) and acceleration (∆ ) of the synchronous machine are chosen as the input signals to the fuzzy controller in order to achieve a good dynamic performance .The complete range for the variation of each of the two controller inputs is represented by a 7×7 decision table, i.e. 49 rules using proportional derivative like fuzzy logic. The power system (SMIB) was tested with the presence and absence of the excitation system, then (CPSS) was added, and then (FPSS).The simulation results of the proposed fuzzy logic on )SMIB( gave a better dynamic response, decreased the settling time and good performance of the stabilizer in damping the fluctuations that arise in the speed of rotation of the generator and its active power in various operating conditions when proposed (FPSS) is compared with conventional PSS. The simulation results proved the superior performance of the proposed (FPSS).
Keywords