Comparison of Consumed Power and Safety of Two Types of Semi-Automatic Vegetable Transplanter: Cam and Four-Bar Link

Abstract

The consumed power and safety of cam and four-bar-link semi-automatic vegetable transplanters were analyzed and compared according to the engine speed and planting distances. A measurement system was constructed to obtain the torque, rotational speed, and strain at the corresponding locations of both transplanters. Field tests were conducted at three engine speeds and three planting distances for each type of transplanter. The torque and rotational speed data of the input shaft of the transplanting devices were used to calculate the power consumed during transplanting. The strain data were converted into stress values to calculate the static safety factor and fatigue life. The results show that the torque and consumed power of the cam transplanter were greater than those of the four-bar-link transplanter under similar operational conditions, owing to its rigid and heavier design. The consumed power increased as the engine speed increased for both types. The static safety factor and fatigue life exhibited different values depending on the measurement location with a sufficient safety margin. Although more skill is required in planting distance control owing to its manual adjustment, the four-bar-link type is more economical under similar operating conditions because of its smaller power requirement.

Keywords

• cam type
• consumed power
• torque
• vegetable transplanter
• four-bar-link type