Effect of Tourmaline Addition on the Anti-Poisoning Performance of MnCeO_x@TiO₂ Catalyst for Low-Temperature Selective Catalytic Reduction of NO<i>_x</i>

Abstract

In view of the flue gas characteristics of cement kilns in China, the development of low-temperature denitrification catalysts with excellent anti-poisoning performance has important theoretical and practical significance. In this work, a series of MnCeOx@TiO2 and tourmaline-containing MnCeOx@TiO2-T catalysts was prepared using a chemical pre-deposition method. It was found that the MnCeOx@TiO2-T2 catalyst (containing 2% tourmaline) exhibited the best low-temperature NH3-selective catalytic reduction (NH3-SCR) performance, yielding 100% NOx conversion at 110 °C and above. When 100–300 ppm SO2 and 10 vol.% H2O were introduced to the reaction, the NOx conversion of the MnCeOx@TiO2-T2 catalyst was still higher than 90% at 170 °C, indicating good anti-poisoning performance. The addition of appropriate amounts of tourmaline can not only preferably expose the active {001} facets of TiO2 but also introduce the acidic SiO2 and Al2O3 components and increase the content of Mn4+ and Oα on the surface of the catalyst, all of which contribute to the enhancement of reaction activity of NH3-SCR and anti-poisoning performance. However, excess amounts of tourmaline led to the formation of dense surface of catalysts that suppressed the exposure of catalytic active sites, giving rise to the decrease in catalytic activity and anti-poisoning capability. Through an in situ DRIFTS study, it was found that the addition of appropriate amounts of tourmaline increased the number of Brønsted acid sites on the catalyst surface, which suppressed the adsorption of SO2 and thus inhibited the deposition of NH4HSO4 and (NH4)2HSO4 on the surface of the catalyst, thereby improving the NH3-SCR performance and anti-poisoning ability of the catalyst.

Keywords

• nitrogen oxides
• denitration catalyst
• tourmaline
• anti-poisoning performance
• flue gas