Stroitel’stvo: Nauka i Obrazovanie (Dec 2019)
Evaluation of thixotropy of clay-gypsum based plaster
Abstract
Introduction. Requirements for mineral based plasters are divided into two groups: technological and performance properties. Plasticity and ease of application are attributed to the technological properties. This determines the requirements for rheological characteristics and, first of all, for the thixotropy of mixtures. The technique is developed and tested on plaster compositions based on clay-gypsum binder which belongs to the category of local binders. Russia has significant reserves of this raw material, but at present it is not used industrially. The main reason is the lack of a scientifically based theory of hardening of the clay-gypsum binder and the formation of its properties without and with modifying additives. The purpose of this research is to develop the composition and technology of application of interior plaster compositions based on stabilized binder. The methodology of studying the rheological properties of dry plaster mixtures based on clay gypsum for interior work and wet rooms is presented. The study of the rheology of clay gypsum mixtures is carried out for the first time, it determines scientific novelty. Recommendations for the use of clay gypsum plaster mixtures determine the practical significance of the research. Materials and methods. Methods of evaluation of thixotropic properties of plaster mixtures based on clay-gypsum binder in laboratory environment are realized. Results. The valid intervals of the water-cement ratio are established which ranged from 0.46 to 0.50, determined by the limiting shear stress and the actual sliding from the vertical wall. Conclusions. The possibility of using a clay-gypsum binder in dry plaster mixtures for interior decorative works in the premises, in particular, confirmed by research. It allows us to assess the actual adhesion of plaster coatings to the concrete based surfaces and to brickwork.
Keywords
