Tool Failure Analysis and Multi-Objective Optimization of a Cutting-Type Energy-Absorbing Structure for Subway Vehicles

Abstract

This paper aims to provide essential guidance for the crashworthiness design of cutting energy-absorbing structures for subway vehicles. By investigating tool failure with experiment and numerical approaches, a new energy-absorbing tube structure was proposed and optimized to improve the crashworthiness and reliability of the cutting energy-absorption structure. The impact test results revealed that multiple failure modes occurred in the tool. Mechanical wear occurs mainly in the middle of the cutting edge, while the tool’s tip failure is primarily due to thermal wear. Impact forces were no longer stable due to tool failure. The simulation results of the established tool-tube thermal–structural coupling finite element model were consistent with the tests. The temperature distribution indirectly validated the failure modes in different tool areas. By eliminating the tearing-type fracture mode, the proposed new structure effectively reduced the high temperature of the tool’s tip, better maintained the uniform temperature of the cutting edge, and smoothed changing of the cutting force. Finally, the Kriging surrogate model and NSGA-II algorithm were utilized to obtain the tool’s minimum steady-state temperature (STT) and maximum mean average cutting force (MCF). The optimal solution determined by the minimum distance method is STT = 514 K, MCF = 131 kN.

Keywords

• tool failure
• crashworthiness
• energy-absorbing structure
• finite element analysis
• thermal–structural coupling
• multi-objective optimization