Applied Sciences (Sep 2019)

The Application of Alginate Coated Iron Hydroxide for the Removal of Cu(II) and Phosphate

  • Hee-Gon Kim,
  • Feng He,
  • Byungryul An

DOI
https://doi.org/10.3390/app9183835
Journal volume & issue
Vol. 9, no. 18
p. 3835

Abstract

Read online

The removal of both cation and anion contaminants in solution typically requires separate processes or multiple materials, resulting in added complexity and higher operational costs. A cost effective and environmental friendly hybrid adsorbent material has been developed for the removal of Cu(II) and phosphate from the solution. Ferric hydroxide (FHO) was prepared by precipitation methods and then dissolved alginate, a biopolymer, was coated on the surface of the FHO particles to generated FHO-A. In the preparation of FHO-A, the alginate concentration is a critical factor in keeping the FHO-A particles suspended in solution where high concentrations of alginate act as a stabilizer and the FHO-A particles are not settled by gravity. The Cu(II) removal efficiency was wholly dependent on the concentration of alginate via the interaction with the polymer carboxyl groups and was not influenced by the concentration of FHO. Conversely, alginate was not involved in the removal of phosphate and instead, FHO was found to be critical for phosphate removal through electrostatic forces. According to FTIR, the new peaks at 1394 and 1593 cm−1 after coating indicated that the alginate was appended to the surface of the FHO. The shift of peak from 1593 to 1588 cm−1 after Cu(II) adsorption confirms the presence of a Cu-carboxylate interaction. The adsorption of Cu(II) was completed within 5 min, which is very similar to nanoparticle mediated sorption processes. In comparison to Cu(II), the presence of alginate retards the phosphate removal rate. Further, pH dependence was observed in the process, where increasing pH results in increased Cu(II) and decreased phosphate removal rates due to alginate deprotonation and the surface charge effects, respectively. The slowed phosphate sorption rate and shifted peaks in the FTIR spectrum confirmed that the layer of alginate was coated on the FHO particle.

Keywords