Influence of shielding gas on machining and wear aspects of AISI 310–AISI 2205 dissimilar stainless steel joints

Abstract

In this article, the effect of shielding gas combinations on gas tungsten arc-welded dissimilar AISI 310 steel and AISI 2205 steel joints was investigated. Two gases such as nitrogen and carbon dioxide were substituted in argon shielding gas and its corresponding improvement in the mechanical, microstructural, machining, and wear aspects of the dissimilar AISI 310–AISI 2205 joints was studied. Weld bead studies, tensile, and weld region microhardness were conducted. X-ray diffraction studies revealed joint intermetallics, and microstructural evaluation was conducted. Machining studies were conducted using drilling experiments. Using local analysis and global analysis, the cutting force variations in the feed direction and cutting direction were studied. Wear tests revealed that the variations in traction force, specific wear rate, coefficient of friction and tribo wear mass loss were studied. A considerable improvement in wear characteristics of AISI 310–AISI 2205 joints was observed by substituting CO2 and N in shielding gas.

Keywords

• shielding gas
• carbon dioxide
• nitrogen
• aisi 310
• aisi 2205
• machining
• wear