Lateral Ultimate Capacity of Monopile Foundations for Offshore Wind Turbines: Effects of Monopile Geometry and Soil Stiffness Properties

Abstract

Offshore Wind Turbines (OWT) with increasingly higher energy output are being developed to meet energy demands, posing greater challenges for their foundation design. Several foundation types are used to support these turbines, with monopiles (MPs) accounting for 80% of the installed capacity. In this study, three-dimensional (3D) nonlinear finite element models (FEM) were employed to investigate the behaviour of a monopile foundation supporting a 5MW wind turbine subjected to lateral loading. The results indicate that the MP behaviour depends on the pile length to diameter (L/D) ratio and the soil shear strength. Inspection of the bending-moment profiles at the lateral ultimate capacity indicated that the monopiles can behave in a flexible manner, even with low L/D ratios. The L/D ratio affected the MP normalized lateral ultimate capacity to varying degrees, and the biggest effect was for soft clays, amounting to an approximately five-fold increase for L/D values of 3.33 to 13.33. Lesser effects were found for stiff clays.

Keywords

• monopile
• offshore wind turbines (OWT)
• lateral ultimate capacity
• green energy