Wearable Sensors Based on Graphene Nanoplatelets Reinforced Polydimethylsiloxane for Human Motion Monitoring: Analysis of Crack Propagation and Cycling Load Monitoring

Abstract

The use of graphene and other carbon nanoparticles is now of interest for developing chemical (gas and compounds detectors) and physical sensors. In this work, a graphene nanoplatelet (GNP)-PDMS sensor is proposed. More specifically, its strain-sensing capabilities under consecutive cycles as well as the crack propagation mechanisms are widely analyzed. First, an analysis of the electrical properties shows that the increase of the GNP content leads, as expected, to an increase of the electrical conductivity, ranging from values around 10−3 to 1 S/m for 5 and 11 wt.% samples. The analysis of crack propagation monitoring capabilities shows an exceptional sensitivity of the proposed flexible sensors, with a highly exponential behavior of the electrical resistance due to the prevalent breakage of the electrical pathways as crack propagation occurs. Furthermore, the analysis of the electrical response under cyclic load proves a very high robustness, with a similar response when comparing different cycles and an electrical sensitivity that increases when decreasing the GNP content (from 15–25 to 25–50 at 7 and 11 wt.% GNP content, respectively), a fact that is explained by the prevalence of tunneling mechanisms at low contents. Finally, a proof-of-concept of human motion monitoring by the detection of neck, wrist and facial movements is successfully achieved, indicating the high applicability of the proposed sensors.

Keywords

• graphene nanoplatelet
• electrical properties
• wearable sensors
• SHM