Transient and periodic steady-state characteristics of the local heat transfer measurement by thermal perturbation with Gaussian power density distribution

Abstract

The local heat transfer coefficient measurement with temperature oscillation induced by periodic thermal perturbation – usually via a Gaussian laser beam, was investigated for the impact of the spikiness (i.e., the standard deviation) elaborated in comparison with the analytical model for dimensional analysis. The statistically more robust technique that relies on the linearity of the spatial phase distribution of the test point array was favored when the target Biot number approaches unity in terms of its order of magnitude. The preferred upper limit for thermographic scanning was discussed as the simplification of later data processing is concerned. Nonetheless, the time elapsed for an acceptable periodic steady state, which in principle leans to the higher end of the target Biot number spectrum in a log scale, indicates the benefit from the time series of pointwise temperature measurement – as in the conventional single-blow testing, where the effect of spikiness, as well as that of the location of individual test point, holds. Note that the vicinity as the target Biot number approaches unity was again observed with higher preference.

Keywords

• Heat transfer coefficient measurement
• Thermal-electric analogy
• Thermal perturbation
• Gaussian laser beam
• Dimensional analysis