A Novel Design Method of Gradient Porous Structure for Stabilized and Lightweight Mandibular Prosthesis

Abstract

Compared to conventional prostheses with homogenous structures, a stress-optimized functionally gradient prosthesis will better adapt to the host bone due to its mechanical and biological advantages. Therefore, this study aimed to investigate the damage resistance of four regular lattice scaffolds and proposed a new gradient algorithm for stabilized and lightweight mandibular prostheses. Scaffolds with four configurations (regular hexahedron, regular octahedron, rhombic dodecahedron, and body-centered cubic) having different porosities underwent finite element analysis to select an optimal unit cell. Meanwhile, a homogenization algorithm was used to control the maximum stress and increase the porosity of the scaffold by adjusting the strut diameters, thereby avoiding fatigue failure and material wastage. Additionally, the effectiveness of the algorithm was verified by compression tests. The results showed that the load transmission capacity of the scaffold was strongly correlated with both configuration and porosity. Scaffolds with regular hexahedron unit cells can withstand stronger loads at the same porosity. The optimized gradient scaffold showed higher porosity and lower maximum stress than the target stress value, and the compression tests also confirmed the simulation results. A mandibular prosthesis was established using a regular hexahedron unit cell, and the strut diameters were gradually changed according to the proposed algorithm and the simulation results. Compared with the initial homogeneous prosthesis, the optimized gradient prosthesis reduced the maximum stress by 24.48% and increased the porosity by 6.82%, providing a better solution for mandibular reconstruction.

Keywords

• functionally graded design
• mandibular prosthesis
• mechanical properties
• high porosity