Tunable 24-GHz Antenna Arrays Based on Nanocrystalline Graphite

Abstract

In this work, we present a tunable 24-GHz antenna array based on a CMOS-compatible 110-nm-thick nanocrystalline graphite film grown by plasma enhanced chemical vapor deposition. The film has a nominal bulk conductivity exceeding 16000 S/m (hence, greater than any graphene monolayer or industrially available graphene multilayer) but still able to show an outstanding modulation of its charge carrier density in the upper microwave spectrum. The manufactured layer was used to design, simulate, fabricate, and test a 24-GHz patch antenna array, with each radiating element having overall dimensions of just $\lambda _{0}/8\times \lambda _{0}$ /7. The fabricated array exhibits a measured maximum gain of about 3 dBi around 24 GHz (unbiased state), with a half-power beam width of only 14.5° (suitable in wireless links where a high directivity is envisaged). Spanning the dc bias voltage between -25 V and 25 V at 24 GHz, the gain can be tuned continuously between -1.5 dBi and 4 dBi, whereas the resonance frequency undergoes a maximum shift of 166 MHz. This voltage-dependent tuning of the gain represents a first step in developing carbon-based applications to control amplitude and phase simultaneously and independently. These results (never reported) demonstrate the big potential of nanocrystalline graphite for high-performance microwave components that are CMOS compatible (a highly desirable characteristic for high fabrication yield and large-scale production), with unprecedented tunability for next-generation high-capacity communications.

Keywords

• Carbon compounds
• patch antennas
• microwave antenna arrays
• tuning