Nonthermal Plasma Multi-Reactor Scale-Up Using Pulse Capacitive Power Supplies

Abstract

The scale up of nonthermal plasma (NTP) reactors requires the simultaneous operation in parallel of a large number of units supplied from the same power supply. The present paper aims to demonstrate the feasibility of parallel operation of multiple mini-NTP reactors. In order to demonstrate the parallel operation of a large number of NTP reactors, three different types of power supplies are considered. In addition to the most simple and common solution, which involves the use of individual, independent power supply for each reactor (an ignition coil driven by a pulse generator), two other configurations of supplies (capacitive AC and capacitive DC), simpler and less expensive, are tested. The capacitive pulsed power supplies allow the generation of HV pulses by an AC power supply (usually an AC transformer), as well as by a DC power supply using an R–C circuit. For the DC resistive–capacitive configuration, the frequency can be adjusted. For all configurations, the power of the discharge can be modified by changing the value of capacitors or resistors. The feasibility of the proposed systems was demonstrated by assessing the concentration of hydrogen peroxide induced in water after plasma treatment. The obtained results reveal that the proposed capacitive AC and DC power supplies allow a large number of plasma reactors to operate in parallel independently.

Keywords

• nonthermal plasma
• hydrogen peroxide
• multi-reactor system
• capacitive pulsed power supply