Effect of Grain Sizes on Electrically Assisted Micro—Filling of SUS304 Stainless Steel: Experiment and Simulation

Abstract

The filling quality of micro-feature structures has a significant impact on the forming quality of micro-channels. The electrical-assisted forming technology can effectively improve the formability of difficult-to-deform materials. In this research, the electrically driven micro-compression constitutive model of SUS304 stainless steels was established to assign grain boundary and grain interior with different material properties. An electrical–thermal–mechanical coupling model was constructed to simulate the filling process considering the effect of grain boundary and grain size. Compared to the experimental results, the simulation indicated a good agreement in microstructure characteristics and higher filling height for the fine-grained material. The increase in grain boundary density makes the resistivity of the fine grain material larger, causing the current destiny and temperature of the specimen to increase with the decrease in grain size. An ellipsoidal gradient temperature distribution is observed due to the uneven current density. Because of the high geometric dislocation density near the grain boundary, a significant dislocation pile-up causes stress to concentrate. It is observed that the deformation coordination is enhanced between the grain boundary and grain core with the decrease in grain size, thus improving the material formability and forming quality.

Keywords

• electrically assisted microforming
• crystal plasticity
• electrical-thermal-mechanical coupling model
• cross-scale simulation
• grain size