Anatomical Characteristics of Unproductive Elaeis guineensis Stems and their Correlation with Density

Abstract

Oil palm is Indonesia's predominant estate crop, but it generates a significant amount of unproductive stem waste. This study examined the anatomical characteristics and their relationship with density from core to bark across the bottom, middle, and top sections, providing insights for effective OPS utilization. Anatomical characteristics were observed with optical and scanning electron microscopy, and the density was measured using an electronic densimeter. The vascular bundle numbers (VBN) increased from core to bark and decreased from top to bottom. The fiber bundle area (FBA) increased from core to bark and from top to bottom. The fiber length (FL), width (FW), and wall thickness (FWT) decreased from bottom to top, whereas the fiber lumen diameter (FLD) increased. The FL of all sections decreased from core to bark. The radial variation of FW, FLD, and FWT varied in each section. The fiber at the inner section of the middle section and the whole top section mostly showed third-grade pulp quality, whereas the bottom section and outer part of the middle section were mainly fourth-grade pulp quality. The density was positively correlated with VBN. FBA, FL, and FW were negatively correlated with oven-dry density, although not significantly, while FWT and FLD were not correlated with OPS density.

Keywords

• anatomical characteristics
• density
• fiber properties
• unproductive oil palm stem