Resonance-State Temperature Compensation Method for Ultrasonic Resonance Wind Speed and Direction Sensors

Abstract

To achieve high-precision wind speed and direction measurements in complex environments, a resonance-state temperature compensation method is proposed based on an ultrasonic resonance principle. This method effectively addresses the issue of sound velocity compensation errors caused by the temperature difference between the internal and external environments when using an internal temperature sensor for temperature compensation. By utilizing an adaptive resonance-state tracking model, the resonance frequency shift issues under varying conditions such as altitude, pressure, and temperature are mitigated. This approach ensures that the resonance frequency is strongly correlated with temperature, enabling temperature compensation through resonance frequency alone, without the need for a temperature sensor. The experimental results indicate that the resonance frequency variation rate with temperature for the resonance-state temperature-compensated ultrasonic resonance wind speed and direction sensor is approximately 0.08 kHz/°C. The wind speed measurement accuracy is ±0.3 m/s (≤15 m/s)/±2.3% (15 m/s~50 m/s), which is superior to the measurement accuracy of traditional ultrasonic wind speed and direction sensors (±0.5 m/s (≤15 m/s)/±4% (15 m/s~50 m/s)). The consistency of wind speed measurement is ≤±0.3%, representing an improvement of approximately 3% compared to ultrasonic resonance wind speed and direction sensors without resonance-state temperature compensation.

Keywords

• wind speed and direction sensor
• resonance-state temperature compensation
• adaptive resonance-state tracking
• wind speed measurement