Phase Change Material Composite Battery Module for Thermal Protection of Electric Vehicles: An Experimental Observation

Abstract

A composite container for an electric vehicle (EV) battery module filled with a phase-change material (PCM) was experimentally tested at various discharge rates. The average cell temperatures at 1 C, 2 C, and 4 C discharge rates, respectively, might reach 38 °C, 50 °C, and 70 °C in the absence of any heat-absorbing material. The temperature was noticeably lower with PCM present than with a conventional battery module. For instance, at 4 C discharge rates, none of the battery cells inside the PCM-filled module were able to reach 70 °C. Unfortunately, the PCM addition also degraded the composite’s tensile qualities. Further investigations used Paraffin-20 and Caprylone since PCMs provide a notably different thermal performance due to their distinctive latent heat profiles. It was observed that a high melting temperature of the paraffin mixture, despite its slightly lower latent heat capacity compared to Caprylone, could lead to a more uniform temperature. Overall, both PCMs can be used as passive protection against any potential thermal abuses in EV battery modules, while in terms of mechanical strength, the use of a composite reinforcement material is strongly encouraged.

Keywords

• battery thermal management system
• composites
• electric vehicles
• heat storage
• latent heat
• temperature uniformity