Design and Characterization of an Upscaled Dielectric Barrier Discharge-Based Ten-Layer Plasma Source for High-Flow-Rate Gas Treatment

Abstract

Dielectric barrier discharge (DBD)-based technology is considered a promising alternative for controlling indoor air pollutants. However, its limited processing capacity and lack of design techniques have restricted its use in practical applications. This paper introduces a methodology for designing upscaled DBD reactors with a processing capacity of up to 1000 L/min for treating high-flow-rate gases to mitigate indoor air pollution. A ten-layer high-flow-rate DBD reactor was constructed, with fundamental characterizations, including electrical and spectroscopic measurements, conducted to verify the feasibility of the proposed methodology. In particular, the flow paths of the ten-layer DBD reactor were optimized by incorporating an air diffuser and perforated metal plates, all without significant modifications. Computational fluid dynamics simulations showed a remarkably improved velocity uniformity (0.35 m/s to 0.04 m/s, as evidenced by the velocity standard deviation) in the 10 flow channels. These simulation results were consistent with the experimental results, wherein the velocity standard deviation reduced from 1.38 m/s to 0.13 m/s. Moreover, multi-gas plasma ignition for up to six gas species and high-flow-rate plasma generation of up to 1000 L/min were achieved. These results provide the foundation for developing DBD technologies for practical applications in high-flow-rate gas treatment, particularly for controlling indoor air pollution.

Keywords

• dielectric barrier discharge plasma
• upscaled reactor
• high-flow-rate gas treatment
• multi-gas plasma
• indoor air pollution control