Numerical simulation of complex flow structures and pressure fluctuation at rotating stall conditions within a centrifugal pump

Abstract

Abstract Rotating stall contributes to global oscillation vibration problems, accompanied by noise and possible turbomachinery damage. This study with special emphasis on the vaned diffuser investigates the unsteady pressure interaction with the stall within the pump. A low specific speed centrifugal pump (ns = 69), fitted with a vaned diffuser is modeled and studied. The model pump performance curve shows the characteristic positive slope at 30% of the best efficiency point flow rate; 1.0 ΦΝ which is attributed to the stall phenomena. A finite volume method is employed with unsteady computations initialized utilizing shear stress transport k‐ω before proceeding with DDES. Pressure fluctuation and velocity magnitude normalized values are used to investigate the evolution of stall cell generation. The root mean square (RMS) values and normalized pressure (Cp) values are elicited to gain insight into pressure pulsation within the flow domain. The distinguished “starfish” shape is observed for monitor points md1 to md20, with the RMS trend decreasing with increasing flow rate from the pump shut off. Although in the vaned diffuser flow channel, an increase in pressure fluctuation along the flow channel toward the trailing edge is observed, the vaned diffuser channel shows a similar trend. The stall cell propagates at a speed of ΩRS = 0.078 at 0.2 ΦΝ, while at 0.1 ΦΝ propagates at a speed of ΩRS = 0.087; the stall speed tends to increase approaching pump shut off. Three distinguishable stall channels are observed from the flow structure for a five vaned diffuser; entering the stall, stalled, and stall recovery stages, within the flow channels.

Keywords

• centrifugal pump
• pressure fluctuation
• stall propagation speed
• vaned diffuser