Characterization of stress drop and strain localization for titanium alloy subjected to electrically-assisted tension

Abstract

The stress drop and strain localization behaviors of Ti–6Al–4V titanium alloy under the action of single pulse were investigated using electrically-assisted (EA) tension tests in this study. It is found that the flow stress drop gradually increases with the increase of current density and pulse width during EA tension. The digital image correlation (DIC) technology was adopted to analyze the strain distribution evolution and fracture regulation in EA micro-tension process. It turn out that the EA tensile sample will suddenly form two new intersecting high-strain bands at the moment of applying a pulse. With the increase of strain, the two high-strain bands converge toward the center and gradually evolve into a crossed localized flow zone, which makes the EA tensile sample exhibit a high local plastic deformation compared with room temperature tension. Furthermore, with the increase of current density, the temperature gradient in the tensile direction of the sample increases gradually, resulting in the narrowing of localized flow zone. The transformation of the localized flow zone eventually leads to the increase of fracture angle and the formation of a sawtooth shape fracture morphology. Finally, a material flow model for the single-pulse EA tension process was established. The calculation results show that about 11 % of the stress drop comes from the contribution of non-thermal electroplastic, the main mechanism of stress drop is thermal softening and thermal expansion induced by Joule heat during EA tension.

Keywords

• Electrically-assisted deformation
• Tensile behavior
• Stress drop
• Strain localization
• Titanium alloy