Preparation and Separation Properties of Electrospinning Modified Membrane with Ionic Liquid Terminating Polyimide/Polyvinylpyrrolidone@Polydopamine

Abstract

In this paper, superhydrophilic polyimide (PI) membranes were prepared using the electrostatic spinning method, capped with a hydrophilic ionic liquid (IL), and blended with polyvinylpyrrolidone (PVP). Using this preparation, the surface of the fiber membranes was coated in polydopamine (PDA) by means of an in-growth method. Scanning electron micrographs showed prepared blend films can form continuous fibers, for whom the distributions of diameter and pore were uniform. Post-modification (carried out by adding hydrophilic substances), the ability of the membrane surface to adhere to water was also significantly improved. The water contact angle was reduced from 128.97 ± 3.86° in unmodified PI to 30.26 ± 2.16°. In addition, they displayed a good separation effect on emulsified oil/water mixtures. The membrane flux reached a maximum value of 290 L·m−2·h−1, with a maximum separation efficiency reached of more than 99%. After being recycled 10 times, the separation efficiency maintained a level exceeding 95%. The purpose of this study is to demonstrate the simplicity and efficiency of this experiment, thereby providing new ideas for the future application of membrane separation technology in wastewater treatment.

Keywords

• polyimide
• membrane
• electrospinning
• ionic liquid
• oil-water separation fiber
• polydopamine