Experimental Study on Interface Frictional Characteristics between Sand and Steel Pipe Jacking

Abstract

In order to study the variation law of shear frictional characteristics of the steel pipe jacking and sand interface under different working conditions, the shear stress–strain curve between five different particle sizes of sand and steel pipe jacking under different normal stress and slurry lubrication conditions was measured by using a direct shear device, and the internal friction angle, friction coefficient and cohesion of the pipe–soil interface were calculated by regression analysis. The test results show that the shear stress between sand and steel pipe jacking decreases with the increase of the average particle size of the sand, and the strain-softening phenomenon occurs. The normal stress does not change the trend of the shear stress–strain curve at the pipe–soil interface, and the peak and residual values of the shear stress increase with the increase of the normal stress. The peak and residual values of the shear stress at the pipe–soil interface under the slurry lubrication condition are smaller than those under the no slurry lubrication condition. The peak shear stress between the pipe and soil under the lubricated slurry condition decreases by about 20%. The internal friction angle and friction coefficient of the pipe–soil interface decrease with the increase of the particle size, and there is no obvious pattern between the cohesion quantity relationship and the average particle size.

Keywords

• slurry lubrication
• steel pipe jacking
• direct shear test
• interface friction