Sustainable Porous Silica Material Extracted from Volcanic Ash of Mount Sinabung Indonesia as Corrosion Inhibitor

Abstract

This study investigated the potential of porous silica material extracted from volcanic ash of Mount Sinabung, Indonesia, as a corrosion inhibitor. The new material was subjected to comprehensive analysis using the X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Search Engine Marketing (SEM), and Atomic Absorption Spectrophotometry (AAS). Corrosion test was conducted by coating the metal surface with synthesized silica. XRD data showed the presence of amorphous silica, while SEM indicated a rough and irregular pore cavity. Based on AAS characterization, the concentration of silica in the Mount Sinabung volcanic ash was 79.23 % (v/v) with a yield of 29.73 %(w/w). Furthermore, coated and uncoated iron plates, with grit variations of 800, 1200, 1500, and 2000, were tested against HCl 15 % (v/v) and NaCl 3.5 % (w/v) as model corrosive solutions. The SEM results showed that coated plates had fewer holes and cracks formation while the XRD analysis of the same samples presented a slight decrease in the intensity of iron phase. Among silica-coated iron plates, the 1500 grit variation had the lowest corrosion rate and the highest corrosion inhibitor efficiency in both HCl 15 % (v/v) and NaCl 3.5 % (w/v) corrosive solutions, recording efficiencies of 26.3 and 91.8 %, respectively.

Keywords

• corrosion inhibitor
• grit
• natural silica
• silica coated iron
• volcanic ash