Effect of Plasto-Oil Blended with Diesel Fuel on the Performance and Emission Characteristics of Partly Premixed Charge Compression Ignition Engines with and without Exhaust Gas Recirculation (EGR)

Abstract

Municipal mixed plastic waste (MMPW) recycling is an innovative way to turn environmental waste into energy fuels. In the present study, a thermochemical process was applied to depolymerize MMPW to produce hydrocarbon fuels known as plasto-oil. The obtained plasto-oil was blended with conventional diesel to test the performance of the PCCI-mode single-cylinder, four-stroke, direct-injection diesel engine. The PCCI combustion mixture was tested with 15% and 30% fuel vapor to ensure homogeneity with and without exhaust gas recirculation. The modified engine findings were compared to a standard conventional engine. At higher loads, PCCI combustion showed reduced emission of carbon monoxide and nitrogen oxides. While the thermal braking efficiency was marginally reduced at all engine loads while using the blends. The results showed that with and without 10% exhaust gas recirculation, an increase in air mix reduced NOx emissions; however, in the case of smoke emissions, an opposite trend was observed. A blend of plasto-oils also decreased CO and unburned hydrocarbon (HC) emissions at higher loads. In conclusion, it was shown that plasto-oils combined with conventional diesel fuel outperformed diesel fuel alone.

Keywords

• municipal mixed plastic waste
• plasto-oil
• diesel engine
• thermal brake efficiency
• PCCI