Actuators (Dec 2014)

Development of a Paper Actuator with PEDOT:PSS Thin-Films as An Electrode

  • Yusuke Hara,
  • Yoshinori Yamaguchi

DOI
https://doi.org/10.3390/act3040285
Journal volume & issue
Vol. 3, no. 4
pp. 285 – 292

Abstract

Read online

A paper actuator was fabricated from poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT:PSS) by a wet process without organic solvents. The paper actuator had a capacitor structure, with a cationic polymer as an insulating layer sandwiched between two PEDOT:PSS films as the electrodes. The thickness of the paper actuator was approximately 36 mm. We measured its displacement as a function of applied voltage and frequency; the maximum displacement was 2.2 mm at 1.5 V and 1 Hz.

Keywords