Biotechnology for Biofuels and Bioproducts (Dec 2023)

Emission characteristics of cellulosic jet biofuel blend under laminar and turbulent combustion

  • Ziyu Liu,
  • Zhichao Wang,
  • Xiaoyi Yang

DOI
https://doi.org/10.1186/s13068-023-02439-4
Journal volume & issue
Vol. 16, no. 1
pp. 1 – 9

Abstract

Read online

Abstract Alternative biofuels have the potential to reduce greenhouse gas emissions and particulate matter due to free of aromatics compared to traditional petroleum-based aviation fuel. The potential mitigating emission of hydrothermal-condensation-hydrotreating jet biofuel (HCHJ) derived from agriculture residue was investigated. The effects of aviation biofuel components, blend ratio and equivalent ratio on emission characteristics were conducted by Premixed Pre-evaporated Bunsen burner (PPBB) for laminar combustion and ZF850 jet engine for turbulent combustion. In compositions, HCHJ had a higher concentration of cycloparaffins (mostly in C8–C10) while petroleum-based aviation fuel (RP-3) had a higher concentration of alkylbenzenes (mostly in C8–C11). In laminar combustion, HCHJ and both 50% blend HCHJ appear no unburned hydrocarbon (UHC) due to low aromatics content and no sulfur in the biofuel. Moreover, there were no significant differences in NO and NO2 concentration for HCHJ and HCHJ blends. In turbulent combustion, HCHJ blends and RP-3 were compared engine emissions at various state points. Considering all complex effects of fuel and combustion environment, HCHJ blend had a noticeable reduction in PM2.5 emissions in comparison with RP-3 due to their lower aromatics and sulfur content. As HCHJ is similar to RP-3 in C/H ratio, density and heat value and the different aromatics contents have different tendencies to generate PM2.5 at different condition, PM2.5 emission is not only related with the total aromatic content and individual aromatic structure but also the combustion environment at thrust setting and coexisting pollutants including NOx and UHC emissions. CO and NOx emission indicated that both of turbulent state and fuel type influence emissions. HCHJ blend can be benefit for PM2.5 reduction and combustion efficiency growth. PM2.5 reduction can be obtained 77.5% at 10% HCHJ blend and 9.5% at 5% HCHJ blend while combustion efficiency can be obtained 0.05% at 5% HCHJ blend and 0.36% at 10% HCHJ blend through all thrust output.

Keywords