Impact of the Different Moulding Parameters on Properties of the Green Sand Mould

Abstract

Sand Casting process depends mainly on properties of the green sand mould, sand casting requires requires producing green sand mould without failure and breakage during separation the mould from the model, transportation and handling. Production of the green sand mould corresponding to dimensions and form of the desired model without troubles depends on the properties of the green sand. Ratio of constituents, preparation method of the green sand, mixing and pressing processes determine properties of green sand. In the present work, study effect of the moulding parameters of bentonite content, mixing time, and compactability percentage on the properties of the green sand mould have been investigated. Design of experiments through Taguchi method was used to evaluate properties of permeability, compressive strength, and tensile strength of the green sand. It was found that 47% of compactability, 9(min) of mixing time, and 6% of bentonite content gives highest values of these properties simultaneously.

Keywords

• green sand
• compactability
• tensile strength
• permeability
• taguchi method