Metamaterials of Auxetic Geometry for Seismic Energy Absorption

Abstract

The propagation of earthquake energy occurs primarily through elastic waves. If the seismic force input to a structure can be directly reduced from the source, then the structure can be protected from seismic wave energy. Seismic metamaterials, regarded as periodic structures with properties different from conventional materials, use wave propagation characteristics and bandgaps to dissipate seismic wave energy. When the seismic wave is located in the bandgap, the transmission of seismic wave energy is effectively reduced, which protects the structure from the damage caused by seismic disturbance. In practical application, locating seismic frequencies below ten Hz is a challenge for seismic metamaterials. In the commonly used method, high-mass materials are employed to induce the effect of local resonance, which is not economically feasible. In this study, a lightweight design using auxetic geometry is proposed to facilitate the practical feasibility of seismic metamaterials. The benefits of this design are proven by comparing conventional seismic metamaterials with metamaterials of auxetic geometry. Different geometric parameters are defined using auxetic geometry to determine the structure with the best bandgap performance. Finite element simulations are conducted to evaluate the vibration reduction benefits of auxetic seismic metamaterials in time and frequency domains. Additionally, the relationship between the mass and stiffness of the unit structure is derived from the analytical solution of one-dimensional periodic structures, and modal analysis results of auxetic metamaterials are verified. This study provides seismic metamaterials that are lightweight, small in volume, and possess low-frequency bandgaps for practical applications.

Keywords

• auxetic
• periodic structure
• seismic metamaterial
• auxetic geometry
• bandgap