Energies (Jun 2021)

Microwave Spectroscopy as a Potential Tool for Color Grading Diamonds

  • Yossi Rabinowitz,
  • Ariel Etinger,
  • Asher Yahalom,
  • Haim Cohen,
  • Yosef Pinhasi

DOI
https://doi.org/10.3390/en14123507
Journal volume & issue
Vol. 14, no. 12
p. 3507

Abstract

Read online

A diamond’s color grading is a dominant property that determines its market value. Its color quality is dependent on the light transmittance through the diamond and is largely influenced by nitrogen contamination, which induces a yellow/brown tint within the diamond, as well as by structural defects in the crystal (in rare cases boron contamination results in a blue tint). Generally, spectroscopic instrumentation (in the infrared or UV–visible spectral range) is used in industry to measure polished and rough diamonds, but the results are not accurate enough for precise determination of color grade. Thus, new methods should be developed to determine the color grade of diamonds at longer wavelengths, such as microwave (MV). No difference exists between rough and polished diamonds regarding stray light when the MW frequency is used. Thus, several waveguides that cover a frequency range of 3.95–26.5 GHz, as well as suitable resonator mirrors, have been developed using transmission/reflection and resonator methods. A good correlation between the S12 parameter and the nitrogen contamination content was found using the transmission/reflection method. It was concluded that electromagnetic property measurements of diamonds in the MW frequency range can be used to determine their nitrogen content and color grading. The MW technique results were in good agreement with those obtained from the infrared spectra of diamonds.

Keywords