iForest - Biogeosciences and Forestry (Aug 2017)

Acoustic evaluation of wood quality with a non-destructive method in standing trees: a first survey in Italy

  • Proto AR,
  • Macrì G,
  • Bernardini V,
  • Russo D,
  • Zimbalatti G

DOI
https://doi.org/10.3832/ifor2065-010
Journal volume & issue
Vol. 10, no. 1
pp. 700 – 706

Abstract

Read online

Research and development efforts are currently underway worldwide to examine the potential use of a wide range of non-destructive technologies (NDT) for evaluating wood and wood-based materials, from the assessment of standing trees to in-place structures. For this purpose, acoustic velocity by the Fakopp time of flight (TOF) tool was used to estimate the influence of four thinning treatments performed in Southern Italy. The objective of the study was to determine if the effects of silvicultural practices on wood quality can be identified using acoustic measurement to assess the MOEd of standing trees with non-destructive method in Calabrian pine (Pinus nigra Arnold subsp. calabrica). Four hundred and fifty standing trees from four sites were non-destructively tested using a time-of-flight acoustic wave technique. The thinning trials were conducted on 60-year-old plantations of Calabrian pine in four plots under different treatments: Control (T), light thinning (A), intermediate thinning (B) and heavy thinning (C). Statistical analysis demonstrated significant stress wave time differences between the stands with moderate thinning (A and B) and those with heavy thinning (C). The results showed that tree diameter has significant influence on acoustic wave measurements and a valid relationship exists between diameter at breast height and tree velocity. The results of these studies proved that the stress wave technique can be successfully applied on standing trees.

Keywords