Energies (Nov 2018)

Stabilization of High-Organic-Content Water Treatment Sludge by Pyrolysis

  • Ye-Eun Lee,
  • I-Tae Kim,
  • Yeong-Seok Yoo

DOI
https://doi.org/10.3390/en11123292
Journal volume & issue
Vol. 11, no. 12
p. 3292

Abstract

Read online

Water treatment sludge from algal blooms were analyzed and compared with general water treatment sludge as the pyrolysis temperature was varied from 300 °C to 900° C. Elemental analysis showed that the water treatment sludge in the eutrophication region has ~12% carbon content, higher than that (8.75%) of general water treatment sludge. X-ray diffraction (XRD) analysis of both types of sludge showed that amorphous silica changed to quartz and weak crystalline structures like kaolinite or montmorillonite were decomposed and changed into stronger crystalline forms like albite. Fourier transform infrared spectroscopy (FT-IR) peaks of humic/fulvic acid that indicated the affinity to combine with heavy metals disappeared above 700 °C. Toxicity characteristic leaching procedure (TCLP), conducted to determine the heavy metal leaching amount of pyrolyzed water treatment sludge, showed the lowest value of 5.7 mg/kg at 500 °C when the humic acid was not decomposed. At 500 °C, the heavy metal leaching ratio to the heavy metal content of high organic content water treatment sludge and low organic content water treatment sludge were 1.87% and 3.19%, respectively, and the water treatment sludge of higher organic content was more stable. In other words, pyrolysis of water treatment sludge with high organic content at 500 °C increases the inorganic matter crystallinity and heavy metal leaching stability.

Keywords