Preliminary Study of Recycled Aggregate Mortar for Electric Arc Furnace Dust Encapsulation

Abstract

This article shows the preliminary results of a study carried out to determine the technical feasibility of encapsulating a high percentage of EAFD in cement-based mortars manufactured with the fine fraction of recycled concrete aggregates (RCA). Two families of mortars, with natural aggregate as a reference and with RCA, were studied. An incorporation rate by weight of two parts mortar to one part EAFD was tested. The mechanical strengths (compressive strength and tensile strength) before and after immersion in water, the rate of delitescence and the leaching behavior were studied. Mortars made with RCA showed similar mechanical strengths to the reference mortars made with natural aggregates; however, the incorporation of EAFD decreased the mechanical strengths. Encapsulation considerably reduced the leaching of heavy metals, although the Pb concentration remained above the hazardous waste limit. With this preliminary study, two wastes are managed together, and the results have shown that the use of RCA instead of natural aggregate is a viable alternative since it does not significantly impair the mechanical or leaching properties of the cement-based matrices used to encapsulate EAFD.

Keywords

• Electric Arc Furnace Dust
• recycled concrete aggregates
• mechanical behavior mortar
• leaching behavior mortar
• encapsulation hazardous waste