Modification of C60 nano-interlayers on organic field-effect transistors based on 2,7-diocty[1]benzothieno-[3,2-b]benzothiophene (C8-BTBT)/SiO2

Abstract

The modification of C60 nano-interlayers on the organic field-effect transistors (OFETs) based on 2,7-diocty[1]benzothieno-[3,2-b]benzothiophene (C8-BTBT)/SiO2 was addressed at both the electronic structure and device level. It is observed that a band bending occurs in C8-BTBT layer with the insertion of C60, which induces a strong hole accumulation at the interface region, facilitating the formation of high concentration conducting channel when the interface is incorporated into OFETs. The strong acceptor C60 may cause charge transfer from the trap states in C8-BTBT, resulting in a field-effect operation with decreased threshold voltage. However, the increasing disorder in C8-BTBT induced by the C60 nano-interlayer may reduce the hole mobility at the C8-BTBT/SiO2 interface region and change the growth model of C8-BTBT. In addition, as confirmed by the transfer characteristic of the OFETs, the thin C60 insertion layer isn’t continuous enough to induce an ambipolar transport behavior despite its high mobility. The competition between the two opposite effects results in compromised performance in such OFETs. The device performance parameters deteriorate generally with increasing the C60 nano-interlayer thickness. So, it is inferred that the C60 interlayer alone cannot improve the performance of the C8-BTBT/SiO2-based OFETs without further optimization. Importantly, the device performance exhibits an abnormal improvement with a 6 nm C60 interlayer, which might be ascribed to a higher energy level shift of C8-BTBT caused by a quasi-continuous C60 film at this thickness.

Keywords

• C60 nano-interlayer
• 2,7-Diocty[1]benzothieno-[3,2-b]benzothiophene (C8-BTBT)
• Organic field-effect transistor (OFET)
• Modification of device performance