Numerical Study on Welding Residual Stress Distribution of Corrugated Steel Webs

Abstract

Residual stresses are an inevitable result of the welded fabrication process of corrugated steel webs (CSWs), resulting in structures with high and unpredictable stress fields, causing unexpected failures. The residual stress field is affected by structural parameters and the welding path of CSWs. This study proposes the welding process simulation method for CSWs with element birth and death technology. The optimization design method of heat source parameters is proposed. The feasibility of the simulation method is verified by comparing the numerical results with the experimental results of relevant literature. As a part of the study, a comparison of residual stress fields upon cooling welded CSWs with bending angles of 30, 45, and 60 degrees is presented. Thereafter, the effect of two types of single-sided welding paths and double-sided welding construction processes on residual stress distribution is discussed. Generally, the study results have shown that the equivalent residual stress near the weld reaches the maximum 344 MPa, which is very close to the Q345 steel yield strength. The size of the bending angle has no major effect on the residual stress distribution pattern, but it influences the residual stress value at the bending position. The residual stress at the bending position increases with the bending angle of CSWs. Different welding paths significantly impact the residual stress of the weld toe, and selecting a reasonable welding path can effectively reduce the residual stress value by 20 to 40 MPa.

Keywords

• welding residual stress
• CSWs
• welding process
• numerical simulation
• thermal-mechanical coupling