Agronomy (Aug 2022)

Performance Evaluation of a Water-Circulating Tomato Root-Zone Substrate-Cooling System Using a Chiller and Its Effect on Tomato Vegetative Growth in Chinese Solar Greenhouse

  • Xin Liu,
  • Shiye Yang,
  • Xinyi Chen,
  • Shengyan Liu,
  • Ruimin Zhou,
  • Liangjie Guo,
  • Yachen Sun,
  • Yanfei Cao

DOI
https://doi.org/10.3390/agronomy12081922
Journal volume & issue
Vol. 12, no. 8
p. 1922

Abstract

Read online

A high-temperature environment is one of the most important factors limiting the growth of crops in Chinese solar greenhouses during summer. To reduce the substrate temperature of summer plant cultivation in a Chinese solar greenhouse, we proposed a water-circulating tomato-root zone-substrate-cooling system (WCTRZSCS). The system used water as the circulating medium, a chiller as the cooling source, and polyethylene raised temperature resistance (PE-RT) pipes laid in the substrate as the cooling component. The greenhouse was divided into test area TS1 (one PE-RT pipe), TS2 (two PE-RT pipes), and a control area CK (no PE-RT pipe) for the root-zone substrate-cooling test. The results demonstrated that (1) in the summer, WCTRZSCS can effectively reduce the substrate temperature, and (2) WCTRZSCS improves the temperature conditions for tomato vegetative growth. There were significant differences in plant height, stem diameter, dry weight, fresh weight, leaf area, net photosynthetic rate, total root length, and total root projection area between tomatoes in the test and control areas (p 1 and TS2 growth rates were 60.2% and 81.2% higher than CK, respectively, and the light-utilization efficiency was 56.3% and 81.3% higher than CK. (3) The system’s cooling energy consumption per unit ground area was 35.2~67.5 W·m−2, and the coefficient of performance (COP) was 5.3~8.7. Hence, WCTRZSCS can effectively reduce the substrate temperature in the root zone, but the profit by tomato cannot offset the cost of using WCTRZSCS. Through the optimization of and improvement in the system, its economy may be further improved, and it is expected to be applied in practical production.

Keywords