Evaluation of local erosion and deposition on the W-monoblock of JA-DEMO divertor

Abstract

We developed and performed a 3D Monte-Carlo simulation on local erosion and deposition in outer divertor target of JA-DEMO. The local erosion and deposition were evaluated considering the divertor plasma parameters and the roof shape of W-monoblocks. First, for local erosion simulation, the trajectories of D ions and impurity (He and Ar) ions were traced before irradiating the monoblock surface. The physical sputtering was calculated by these ions irradiation, considering their charge states, incident-energies and -angles. The highest sputtering flux was produced by multiply-charged Ar ions (Ar3+–Ar5+). The sputtering flux strongly depended on the poloidal positions along the divertor target. Although almost no erosion (sputtering) was obtained in low-temperature zone (∼1 eV), the erosion occurred in mid- (∼10 eV) and high-temperature (>10 eV) zone. Second, for local deposition simulation, the trajectories of W atoms emitted from the monoblock surface were traced. After transport (including ionization and recombination) in the plasma, W atoms and ions were deposited on the monoblock surface. The deposition occurred even on the area where plasmas did not irradiate (shadow). This was due to perpendicular diffusion to magnetic field lines, gyro-orbit effects for W ions and straight-line motion for neutral W atoms. The poloidal distribution of the deposition fluxes was similar to that of the sputtering fluxes. In low-temperature zone, no deposition flux occurred due to very low sputtering flux. The deposition flux in mid-temperature zone increased significantly and that in high-temperature zone remained high.

Keywords

• Tungsten
• Sputter erosion
• Local deposition
• Divertor
• DEMO
• Monte Carlo simulation